System Power - Intergraph TD-x20 Setup Manual

42

System Power

ERROR - Fails to power on.
Reason
Power cord not connected properly.
Power not available at the outlet.
Power not available from the UPS.
Power switch not in the proper position.
Internal power cables not connected.
Faulty power cord.
Solution
Verify that the power cord is properly
connected to the power receptacle.
Verify power to the outlet has not been
interrupted. Test the outlet with a known
working appliance.
Verify the UPS is connected and
operating properly.
Be sure that the power switch on the front
of the base unit is in the ON position
(pushed in).
Open base unit and ensure all power
cables are connected properly.
Replace power cord.