Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intergraph TDZ 2000/ExtremeZ
Summary of Contents for Intergraph TDZ 2000/ExtremeZ
- Page 1 TDZ 2000/ExtremeZ Late-Breaking News April 1999 DHA024181...
- Page 2 Notice Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document.
- Page 3 General Powering Down the System If you use the “Power down the computer” option in the Automatic Shutdown Utility, you must press the Standby button to turn off system power. Matrox Millennium G200 AGP Graphics If your system was delivered with an installed Matrox Millennium G200 AGP video display adapter, you can combine G200 with Matrox Millennium II PCI video display adapters for multi- screen configurations.
-
Page 4: System Bios
System BIOS Please note the following items related to the system BIOS: The troubleshooting information in the System Setup document contains a list of beep codes and associated error messages. You can disregard these codes and messages, as they are not used by the TDZ 2000. -
Page 5: Chassis Fans
Option Notes Hard Disk Power Down Mode This option specifies the power conserving state that the hard disk drive enters after the specified period of hard drive inactivity has expired. The settings are Disabled, Standby, or Suspend. The Optimal and Fail-Safe settings are Disabled. Hard Disk Time Out This option specifies the length of a period of hard disk drive inactivity. -
Page 6: Windows Nt
Microsoft. Enabling PC Card Hard Disk Operation Intergraph Computer Systems has found a resource conflict that keeps a PC Card hard disk (ATA or AT type) from being configured by Windows NT. To work around this conflict and enable operation of a PC Card hard disk in a PC Card adapter, you must edit the Windows NT Registry. -
Page 7: Installing Windows 95
Windows 95 CAUTION Intergraph Computer Systems does not fully certify Windows 95 on the TDZ 2000, and does not ship Windows 95 installed on the TDZ 2000. The following basic information is provided as a courtesy for customers who attempt to install Windows 95 on a TDZ 2000. - Page 8 Using the CD-ROM Drive in MS-DOS Mode Intergraph Computer Systems has discovered a problem you may encounter if you try to install Windows 95 on a TDZ 2000. If the system has a Panasonic CD-ROM drive, you cannot use the CD-ROM drive by default when the system is in MS-DOS mode.
- Page 9 95, you must disable the use of Hardware Monitor on the system. To do this, run the BIOS Setup program, and set the H/W Monitor, Primary I/O Port parameter in the Chipset menu to Disabled. See the System Setup document for information on running the BIOS Setup program and changing BIOS settings.
Need help?
Do you have a question about the TDZ 2000/ExtremeZ and is the answer not in the manual?
Questions and answers