Finishing System Setup; Creating A Repair Disk - Intergraph TD-x20 Setup Manual

Finishing System Setup

After operating system Setup is completed, an InterSite Welcome icon ("Press to finish
setup") displays on the operating system desktop. Double-click this icon, or select
Programs/InterSite/Welcome from the Start menu, to display InterSite Welcome.
InterSite Welcome helps you do the following:
u
Create a repair disk for the operating system.
u
Create backup diskettes of device driver software and other system software products.
u
Display an online System Introduction for your system.
u
Learn about Intergraph Computer Systems customer support.
You should take advantage of the tools provided by InterSite Welcome to ensure that your
system is fully ready for use. See InterSite Welcome for more information. Also see the
following sections for information on creating a repair disk and creating backup diskettes.

Creating a Repair Disk

If you did not create an Emergency Repair Disk during Setup, use the tools provided by
InterSite Welcome to do so. The files on these diskettes can restore the original contents of a
damaged operating system Registry (that is, at the time the operating system was installed),
Media Tabs
13