Cleaning The Machine - Xerox 6204 Wide Format Solution User Manual

Cleaning the Machine

If the reflection plate or scanner glass is dirty, image quality defects such as black lines or grids may
appear on copies.
WARNING: To reduce the risk of electric shock, power off the machine before cleaning, as directed
in the section on "Powering the System On/Off".
CAUTIONS:
• Do not use benzene, paint thinner, other volatile liquids, or insect sprays/repellents on the
machine. These substances may discolor, deform, or crack covers.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction.
To clean the machine:
1. Power off the machine as indicated in the above Warning.
2. Pull the document handler toward you until it stops, and lift it up to remove.
3. Wipe the white reflection plate at the backside of the document handler cover with a clean, dry
cloth. If the dirt is difficult to remove, try gently wiping with a firmly wrung out soft cloth
moistened with a small amount of Xerox lens/glass cleaner. Then, wipe again with a dry cloth.
Do not use cleaning agents other than water, a neutral detergent, or Xerox lens/glass cleaner.
Xerox 6204 Wide Format Solution
User Guide
Maintenance
9-183