Xerox 6204 Wide Format Solution User Manual page 260

Problem Solving
Symptoms Check
The image on Is the original inserted
the copy is correctly in the scanner?
skewed.
Is the media loaded
correctly?
Is the original guide at the
correct position?
Is the media tray set up
correctly?
Part of the image Is the media damp?
is missing on the
copy, or the
image is
smudged or
Is the loaded media folded
unclear) .
or wrinkled?
Dirt appears at Dirt on the paper feed path.
equal intervals.
Internal components are
dirty.
Black dots are Internal components are
printed. dirty.
10- Xerox 6204 Wide Format Solution
188 User Guide
Remedy
Insert the original correctly.
Refer to Step 3 - Scanning the Original.
Load the media correctly.
Refer to the section on Loading Media.
Correctly insert the original, with the edge of the
original aligned with the original guide.
Refer to Step 3 - Scanning the Original.
Firmly push in the media tray.
Refer to the section on Loading Media.
If the media is damp, some parts of the copy may not
print or the copy may be smudged and unclear. Replace
with media from a new supply.
Refer to the section on Loading Media.
Remove the defective media and replace with new
media.
Refer to the section on Loading Media.
Copy a few pages.
Contact your Xerox Customer Support Center.
Contact your Xerox Customer Support Center.