Error Messages - Xerox 6204 Wide Format Solution User Manual

Error Messages

This section describes how to solve the problem when an error message appears. Error messages
displayed will vary depending on your particular situation and the error involved.
Error Message
A fault has occurred.
Switch Off the Machine and then
On.
(XXX-XXX)
A fault has occurred.
Press [Restart] to start recovery.
(XXX-XXX)
Cause and Remedy
[Cause] An error occurred.
[Remedy]Turn off the power, wait until the touch screen
goes dark (about 10 sec.), and then turn on power again.
If the message persists, record the displayed contents for
[(XXX-XXX)]. Switch off the machine immediately, wait for
the touch screen to go dark, and contact your Xerox
Customer Support Center.
[Cause] An internal error occurred.
[Remedy] Select the [Restart] button on the display.
If the error persists, turn off the power (about 10 sec.), then
turn on the power again.
If the message persists, record the displayed contents for
[(XXX-XXX)]. Switch off the machine immediately, wait for
the touch screen to go dark, and contact your Xerox
Customer Support Center.
Xerox 6204 Wide Format Solution
User Guide
Problem Solving
10-
197