Problems During Copying - Xerox 6204 Wide Format Solution User Manual

Problem Solving

Problems During Copying

The following helps you solve problems encountered during copying.
Symptoms Check
Copy does not Did you select the correct
print at the original size series?
desired size.
Did you select the correct
media size series?
Is the original inserted
correctly in the scanner?
Is the original guide at the
correct position?
Is the original folded or
bent?
Original does not Is the original too small?
feed into the
original feeder.
Unable to copy Is the media correctly loaded
using the manual in the manual feed tray?
feed tray
(Bypass).
Original often Is the original in good
jams. condition?
Is the original too small or
too thick?
A corner of the Is the original curled?
original is folded.
10- Xerox 6204 Wide Format Solution
186 User Guide
Remedy
Select the original size series that matches with the
original size.
Refer to the section on Size Series Settings for Originals.
Select the media size series that matches the media
size.
Refer to the section on Media Settings.
Load the original correctly.
Refer to Step 3 - Scanning the Original.
Correctly set the original guide.
Refer to Step 3 - Scanning the Original.
Straighten and correctly insert the original.
Refer to Step 3 - Scanning the Original.
The minimum size original that can be fed is
approximately 182mm/7inches wide by 210mm/8.25
inches long.
Refer to the section on Usable Originals.
Correctly load the paper media.
Refer to the section on Using the Manual Feed Tray
(Bypass).
Insert a usable type of original.
Refer to the section on Usable Originals and Step - 3
Scanning the Original.
The minimum size original that can be fed is
approximately 182mm/7inches wide by 210mm/8.25
inches long. Some thick originals may require the
removal of the front return guides.
Refer to the section on Usable Originals.
Flatten out the curl and insert the original again.