Models 2603, 2621, and 2635 Getting Started Guide
6. Click on
.
Create
7. Click on Services Configuration > IP Routes > Create new Ip V4 Route. Create the gateway to the remote
router by entering the WAN IP address of the remote router, in this example, enter 192.168.164.3 in the
Gateway field. (See
8. Click the Update button.
The other fields should be:
•
Destination: 0.0.0.0
•
Gateway: 192.168.164.3
•
Mask: 0.0.0.0
•
Cost: 1
•
Interface: [blank]
You can see the status of the PPP link by going to the 'Edit PPP' web page and paging down until you see the
"Summary" description. In
page, follow this path: Services Configuration > WAN > Edit... > Edit 'PPP'
WAN Service Configuration
Figure 31. Edit IP address of WAN port
figure
32.)
Figure 32. Configuring the gateway
figure 33
the PPP link is in the Establishment phase. To get to the 'Edit PPP' web
6 • WAN Services
56