Configuring Security Policies - Patton electronics IPLink 2603 Getting Started Manual

Models 2603, 2621, and 2635 Getting Started Guide
Configuring Security Policies
Continue the previous example by defining security policies. We will add only one Firewall policy, called etoi,
signifying an external-to-internal policy between the external and internal interfaces.
1. Go to the last section on the Security Interface Configuration webpage called 'Policies, Triggers and Intru-
sion Detection.' Click on the hyperlink Security Policy Configuration... (See
2. Click on the hyperlink New Policy... (See
3. Select the parameters so the policy is defined as follows:
Between interfaces of types: external internal
Validators will allow traffic.
Click on Apply.
Configuring the security interfaces
Figure 46. Define 'ppp-0' interface as External
Figure 47. Security Policy Configuration hyperlink
figure
Figure 48. New Policy link to configuration webpage
48.)
7 • Security
figure 47.)
73