Patton electronics IPLink 2603 Getting Started Manual page 55

Models 2603, 2621, and 2635 Getting Started Guide
3. Click on Create a new service in the main window, select "PPP routed" and click on the
In the Description field, enter the description you wish. In this example, it is called PPP Routed.
• Description: PPP Routed
• Interface: 1
• WAN IP address: 192.168.164.2 255.255.255.255
• LLC Header Mode: off
• HDLC Header Mode: ON
• No authentication
• Username: [blank]
• Password: [blank]
4. Click on Create.
5. Go to Services Configuration > WAN > Edit... (for PPP routed) > Edit 'IP Interface' > Ipaddr: [enter the
WAN IP Address and Mask, in this example = 192.168.164.2 and 255.255.255.255]. (See
WAN Service Configuration
Figure 30. PPP Routed Configuration menu
6 • WAN Services
button.
Continue
figure 31.)
55