Frame Relay Configuration - Patton electronics IPLink 2603 Getting Started Manual

Models 2603, 2621, and 2635 Getting Started Guide
All LMI configuration variables are contained under the "LMI Management" window found through the Ser-
vices Configuration >LMI Management link. The following screen shows the configuration variables available.
Frame Relay Configuration
The Frame Relay service can be configured for either bridged or routed applications. The use of DLCI values
since the original publication of the Frame Relay specifications has been modified as to their use. For the two-
octet address format, they are as follows:
DLCI Number
0 Used for in-channel signaling
1 – 15 Reserved DLCI's
16 – 991 Assigned using Frame Relay connection procedures. Verify that none of these values
have been assigned to permanent frame relay cells.
992 – 1007 Layer 2 management of FR bearer service
1008 – 1022 Reserved
1023 Used for in-channel layer management
WAN Service Configuration
Figure 34. LMI Configuration webpage
Use
6 • WAN Services
60