Login; Changing The Wan Ip Address - Patton electronics SmartNode 4900 Getting Started Manual

SmartNode 4900 Series Getting Started Guide

Login

To access the SmartNode, start the Telnet application. Type the default IP address for the router into the
address field: 192.168.1.1. Accessing your SmartNode via a Telnet session displays the login screen. Type the
factory default login: administrator and leave the password empty. Press the <Enter> key after the
password prompt.
login:administrator
password: <Enter>
192.168.1.1>
After you have successfully logged in you are in the operator execution mode, indicated by > as command line
prompt. With the commands enable and configure you enter the configuration mode.
192.168.1.1>enable
192.168.1.1#configure
192.168.1.1(cfg)#

Changing the WAN IP address

Select the context IP mode to configure an IP interface.
192.168.1.1(cfg)#context ip router
192.168.1.1(ctx-ip)[router]#
Now you can set your IP address and network mask for the interface ETH 0/0 (WAN). Within this example a
network 172.16.1.0/24 address is assumed. The IP address in this example is set to 172.16.1.99 (you should
set this the IP address given to you by your network provider).
172.16.1.99(ctx-ip)[router]#interface eth0
172.16.1.99(if-ip)[eth0]#ipaddress 172.16.1.99 255.255.255.0
2002-10-29T00:09:40 : LOGINFO : Link down on interface eth0.
2002-10-29T00:09:40 : LOGINFO : Link up on interface eth0.
172.16.1.99(if-ip)[eth0]#
172.16.1.99(if-ip)[eth0]#copy running-config startup-config
172.16.1.99(if-ip)[eth0]#
The SmartNode can now be connected to your network.
1. Configure IP address
VoIPon www.voipon.co.uk
Note If your WAN connection's IP address is assigned via DHCP, refer to
Chapter 21, "DHCP configuration" in the SmartNode Series Smart-
Ware Software Configuration Guide for information on configuring
DHCP. Copy this modified configuration to your new start-up con-
figuration. Upon the next start-up the system will initialize itself
using the modified configuration.
sales@voipon.co.uk
4 • Getting started with the SmartNode 4900 Series
Tel: +44 (0)1245 808195
40
Fax: +44 (0)1245 600030