Ip Interface Wan Is Bound To Pvc 1 On Port Serial 0 0 - Patton electronics IPLink 2821 Getting Started Manual

IPLink 2800 Series Getting Started Guide
Frame Relay PVC. If serial Frame Relay PVC shall be used as WAN access, a suitable name for the logical IP
interface could be wan as in
Figure 12. IP interface wan is bound to PVC 1 on port serial 0 0
This procedure describes how to bind the Frame Relay PVC DLCI on the serial interface to the logical IP
interface name, which is related to the IP context router.
Mode: PVC
Step
node (pvc)[ dlci ]#bind interface name router
1
Example: Binding the Frame Relay PVC to IP interface
The following example binds the Frame Relay PVC 1 to the IP interface wan of IP context router to the serial
interface on slot 0 and port 0 of an IPLink router.
2800(cfg)#port serial 0 0
2800(prt-ser)[0/0]#framerelay
2800(frm-rel)[0/0]#pvc 1
2800(pvc)[1]#bind interface wan router
Serial port configuration task list
figure 12 below.
IP
interface
eth0
IP
interface
eth1
Port
Ethernet
0 0
Command
Context
IP
"router"
IP
interface
wan
Port Port
Ethernet Serial
0 1 0 0
Binds Frame Relay PVC dlci to the IP interface
name of IP context router
4 • Serial port configuration
Purpose
53