Central Site Configuration; Wan Services' Options - Patton electronics IPLink 2603 Getting Started Manual
Iplink series high speed routers
Hide thumbs
Also See for IPLink 2603:
- Quick start manual (9 pages) ,
- Specification sheet (2 pages) ,
- Getting started manual (133 pages)
Table of Contents
Advertisement
Models 2603, 2621, and 2635 Getting Started Guide
4. In the Description field, enter the description you wish. This is a mandatory field. Without a description,
you cannot create the WAN service.
Verify the settings to be:
•
Interface = 1
•
LLC header mode = dialout
•
LLC header mode = off
•
HDLC header mode = on
•
No authentication
•
Leave User name and Password blank.
Click on
.
Create
Central Site Configuration. If the central site also has an IPLink, you may configure as described in this sec-
tion. Refer to the web page images for the Remote IPLink configuration above.
In this example, the IP address of interface ip1 is changed to 192.168.100.3/24.
WAN Service Configuration
Figure 28. WAN services' options
6 • WAN Services
53
Advertisement
Table of Contents
