Tools Required - Craftsman ZTS 7500 Operator's Manual

Warranty Statement ..................................................... 2
Safety RuJes & information for Bagger ..................... 5
Operating instructions for Bagger ............................. 6
initial Assembly & installation .................................... 7
44" & 50" Mode[ Assembly and installation ............ 11
Normal installation/Removal of 44" & 50" Bagger.14
42" Mode[ Assembly and installation ...................... 16
Normal installation/Removal of 42" Bagger ............ 20
French Manual ........................................................... 19
Spanish Manual ......................................................... 37
Repair Parts ......................................................... PTS-1
Hardware identification &
Torque Specifications ................... inside Back Cover
Service Telephone Numbers .................... Back Cover
ONE YEAR FULL WARRANTY on CRAFTSMAN 2-BIN BAGGER
For one (1) year from the date of purchase, if any parts of this product are defective in material or workmanship,
Sears w[[[ repair or replace them free of charge,
THIS WARRANTY DOES NOT COVER:
o Bagger cloth bags which are expendable and wear out with normal use,
Repairs necessary because of operator negligence, including but not limited to, failure to maintain the equipment
according to the instructions contained in the operator's manual
o Bagger if used for commercial or rental purposes,
WARRANTY SERVICE IS AVAILABLE BY RETURNING DEFECTIVE PARTS TO THE NEAREST SEARS PARTS &
REPAIR CENTER IN THE UNFED STATES,
FOR THE NEAREST SEARS PARTS & REPAIR CENTER LOCATION, CALL 1-800-4-MY-HOME ®,
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state,
Sears, Roebuck and Co,, Dept, 817WA, Hoffman Estates, [L 60179
TOOLS REQUIRED
Description Quantity
7/16" Box Wrench, 6 Pt 1
1/2" Open-end Wrench 1
1/2" Box Wrench, 6 Pt 1
9/16" Open-end Wrench 1
9/16" Box Wrench, 6 Pt 1
3/8" Drive Ratchet 1
3/8" x 3" Extension Bar 1
7/16" x 3/8" Drive, Socket, 6 Pt 1
1/2" x 3/8" Drive, Socket, Deep, 6 Pt 1
9/16" x 3/8" Drive, Socket, 6 Pt 1
3/4" x 3/8" Drive, Socket, Deep, 6 Pt 1
#2 Phi[lips Screw Driver 1
See Page 55 for Wrench and Fastener Size Guide,