Hitch Installation - Craftsman ZTS 7500 Operator's Manual

\
Left View Back View
Figure 2. Install Hitch Assembly
A. Frame
B. Hitch Assembly
C. Debris Guard
D. Capecrew, Debris Guard, 3/8-18
E. Capscrew, Seat Deck Support, 5/18-18
F. Nut, Nylock, Ftanged 3/'8-18
G. Nut, Nylock, Ftanged 5/18-16
H. Nut, !/2-!3
I. Nut, 3/8-!6
J. Rear Transmission Support
HITCH iNSTALLATiON
Hitch mnstaHation
1, Remove 5/16=16 nut (G, Figure 2) from seat deck
support
capscrew (E),
2, Remove 3/8-16 nut (F) from rear debris guard
capscrew (D),
3, Remove 1/2=13 nut (H) from rear of frame (A),
4, Remove 3/8-16 nut (I) from rear transmission
support (J),
5,
6,
7,
Attach hitch assembly (B) to frame (A) sliding rear of
hitch flush with frame,
Finger tighten 3/8=16 nut (F), 5/16=16 nut (G), 1/2=13
nut (H) and 3/8=16 nut (I),
Tighten 3/8-16 nut (F) and 5/16=16 nut (G) first, then
1/2=13 nut (H) and 3/8-16 nut (I),