Download Print this page

Craftsman ZTS 7500 Operator's Manual

Zero-turn rear engine rider with electric start 26 hp kohler engine with 50" mower
Hide thumbs

Advertisement

Operator's Manual
ZTS 7500
Zero-Turn Rear Engine Rider with
Electric Start
Model No.
107.28791
(26 HP Kohler Engine with 50" Mower)
CAUTION:
Before using this product,
read
the manual and follow all its Safety Rules
and Operating
Instructions.
For answers to your questions
about this
product, call:
1-800-659-5917
Sears Craftsman
Help Line
5 am - 5 pm, Mon- Sat
Nota: Una traducci6n
en espaSol
de este Manual
del Operador
puede encontrarse
en la pagina
33.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
U.S.A.
Visit our Craftsman website: www.sears.com/craftsman
TP 899-4871-01-CZ-C
7102360
Revision 01

Advertisement

loading

  Related Manuals for Craftsman ZTS 7500

  Summary of Contents for Craftsman ZTS 7500

  • Page 1 5 am - 5 pm, Mon- Sat Nota: Una traducci6n en espaSol de este Manual del Operador puede encontrarse en la pagina Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman TP 899-4871-01-CZ-C 7102360 Revision 01...
  • Page 2: Table Of Contents

    For your convenience, IN HOME warranty service will still be available after the first 30 days of purchase, but a trip charge will apply. This charge will be waived if the Craftsman product is dropped off at an authorized Sears location.
  • Page 3 Read thesesafety rulesandfollow themclosely. F ailure toobeytheserulescouldresult i n lossofcontrol of unit,severe personal injury or deathtoyou,or bystanders, or damage toproperty or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle _ in text signifies important cautions or warnings which must be followed. GENERAL OPERATION 19.
  • Page 4 SLOPE OPERATION -,AWARNING Slopes are a major factor related to loss-of-control and tip- Never operate on slopes greater than 17.6 percent over accidents, which can result in severe injury or death. (10 °) which is a rise of 3-1/2 feet (106 cm) vertically in Operation on all slopes requires extra caution.
  • Page 5 SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION OF RIDER WiTH ATTACHMENT ONLY RIDE UP AND DOWN HILL, NOT ACROSS HiLL 10 DEGREES MAX. WARNING: To avoid serious injury, operate your unit up and down the face of slopes, never across the face. Do not operate on slopes greater than 10 degrees.
  • Page 6 SERVICE AND MAINTENANCE 13. If the fuel tank must be drained, it should be drained outdoors. Safe Handling of Gasoline 14. Replace faulty silencers/mufflers. 1. Extinguish all cigarettes, cigars, pipes, and other 15. Maintain or replace safety and instruction labels as sources of ignition.
  • Page 7 SAFETY & OPERATION DECALS All DANGER, WARNING, CAUTION and instructional This unit has been designed and manufactured to messages on your rider and mower should be carefully provide you with the safety and reliability you would read and obeyed. Personal bodily injury can result when expect from an industry leader in outdoor power these instructions are not followed.
  • Page 8: Identification Numbers

    Tilt the seat forward to access the ID tag. Model Description Name/Number For answers to your questions about this product, call: 1-800-659-5917 Stock Number Jnit Serial Number Sears Craftsman Help Line, 5 am - 5 pm, Monday-Saturday. Date Purchased Engine Make Engine Model Engine Type/Spec Engine Code/Serial...
  • Page 9 Remove the Packaging Materials Fill-Up with FRESH Gasoline Remove the cardboard from the crate. Lift the seat deck to access the Remove any steel branding securing the unit to the crate. Locate the manual Remove the fuel tank cap and fill packet.
  • Page 10 Left GroundSpeed Control Lever Choke Ground Speed L evers - Gregnd S peed Levers - DRIVE Positons START/PARK Positons (Closed) Choke J!J (open) FuelTank Engine Speed (Fast) CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, O FF_%STA Transmission driving, and mowing require the combined use of...
  • Page 11: Operation

    Mower Blade Switch Mower Cutting Height Switch To increase the mower cutting height (raise the mower The yellow mower blade switch turns the mower blades deck), press the top of the yellow mower cutting height on and off. To turn the mower blades ON, pull the switch switch.
  • Page 12 CHECKS BEFORE STARTING • Check that the crankcase oil is filled to full mark on dipstick. • Fill the fuel tank with fresh fuel. FUEL RECOMMENDATIONS For daily operation: Use only unleaded gasoline with a pump sticker octane rating of 87 or higher. Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by volume) is approved as a fuel.
  • Page 13 EMERGENCY STOPPING PUSHING THE RIDER BY HAND In the event of an emergency the engine can be stopped NOTE: Do not disengage the transmissions while parked by simply turning the ignition switch to STOE Use this on a slope. method only in emergency situations. For normal engine 1.
  • Page 14 DRIVING PRACTICE- Smooth Travel The lever controls of the BASIC DRIVING zero turn rider are WARNING: Never operate on slopes greater than 17.6% highly responsive. (10°). See SLOPE OPERATION in the safety section. The BEST method of Zero turn riders operate differently from other four- handling the ground wheeled vehicles.
  • Page 15 Practice Turning Around a Corner Practice Turning In Place While traveling forward allow one handle to gradually To "zero turn" means to turn in place. To turn in place, return back toward neutral. Practice several times before gradually move one ground speed control lever forward from neutral and one lever back from neutral mowing.
  • Page 16 MOWER DECK REMOVAL & INSTALLATION NOTE: Perform mower removal and installation on a hard, level surface such as a concrete floor. WARNING After lowering the mower cutting height, engage parking brake, turn off the mower blades, turn the ignition switch to STOP, and remove key before attempting to install or remove the mower.
  • Page 17: Maintenance

    MAINTENANCE SCHEDULE The following schedules should be followed for normal care of your rider and mower. RIDER MAINTENANCE, All Models Before Spring Yearly Each Use & Fall Hours Hours Hours Hours Clean Debris from Rider and Engine Compartment * Clean Debris from Engine Cooling Areas & Air Filter * Check Tire Pressure Lubricate Rider &...
  • Page 18 Rider Maintenance Items WARNING Move the ground speed levers to START/PARK positions, turn the mower blades OFF, turn the ignition switch OFF, and wait for all moving parts to stop before accessing the engine compartment or performing any maintenance procedures. ACCESSING THE ENGINE COMPARTMENT...
  • Page 19 LUBRICATION Service Interval: 25 hours. Lubricate the unit at the locations shown in Figures 15 through 19 as well as the following lubrication points. Grease: • front wheel bushings • mower pivots • front wheel grease fittings • mower arbors Use grease fittings when present.
  • Page 20 CLEAN DECK & CHECK / REPLACE MOWER BLADES Service Interval: 25 hours or as required. WARNING For your personal safety, do not handle the sharp mower blades with bare hands, Careless or improper handling of blades may result in serious injury, LOOSEN WARNING...
  • Page 21 CLEANING THE BATTERY AND CABLES CHECK RIDER SAFETY Service Interval: 100 Hours SYSTEM WARNING Service Interval: Every 100 hours, every spring/fall, Corrosion hazard. and after storage of 30 days or longer. Batteries contain acid. Always keep the This unit is equipped with safety interlock switches. battery upright and do not spill the These safety systems are present for your safety.
  • Page 22 CHECK / ADJUST PTO CLUTCH WARNING To avoid serious injury, perform adjustments only with engine stopped, key removed and tractor on level ground. Service Interval: 200 Hours. The Power Take Off (PTO) clutch drives the mower blades. The PTO clutch is engaged and disengaged by the mower blade switch.
  • Page 23 Engine Maintenance Items Use 0il classified API Service Class SG, SH, SJ or better with SAE Viscosity: CHECK ENGINE OIL LEVEL Service Interval: Before each use, and every 8 hours. 4N I 1. Turn the engine off, and set the ground speed controls to PARK.
  • Page 24 REPLACE AIR FILTER Service Interval: Every 25 hours or two months, or as required. 1. Loosen the air filter cover knobs (A, Figure 28) and remove the cover (B). Clean out any debris from around the air filter. Inspect the condition of the sealing surfaces of the air filter element (C) and filter base (D).
  • Page 25 GROUND SPEED CONTROL LEVER ADJUSTMENT The control levers have three adjustments: To Adjust Control Lever Height: Pull the levers in across the operator's lap to their DRIVE positions. Loosen the mount bolts (D, Figure 30) and raise or lower the levers to the desired position. Tighten the mounting bolts.(D).
  • Page 26 BRAKE ADJUSTMENT ENGINE ADJUSTMENTS 1. Stop the unit, turn the ignition OFE set the ground The engine is designed to deliver the correct speed levers to PARK positions, and wait for all performance under all operating conditions. moving parts to stop. adjustments must be performed by a Sears or other qualified service dealer.
  • Page 27 MOWER DECK LEVELING ADJUSTMENTS WARNING Before adjusting the mower, turn the mower blades OFF, turn the ignition switch OFF, remove the key, and allow all moving parts to stop. Disconnect the spark plug wire and fasten it away from the spark plug. Figure 33.
  • Page 28 Figure 36. Orient Blades Front-to-Back Front To Back Leveling If the cut is uneven, the mower may need leveling. Unequal or improper tire pressure may also cause an uneven cut. See CHECK TIRE PRESSURE. Figure 37. Front-to-Back Leveling 1. Turn the blades front-to-back as shown in Figure 36. A.
  • Page 29: Storage

    STORAGE WARNING Storage Before Never store the unit (with fuel) in an enclosed, Before you store your unit for the off-season, read the poorly ventilated structure. Fuel vapors can Maintenance and Storage instructions in the Safety travel to an ignition source (such as a furnace, Rules section, then perform the following steps: water heater, etc.) and cause an explosion.
  • Page 30 While normal care and regular maintenance will extend the life WARNING of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue To avoid serious injury, perform maintenance on operating properly. The troubleshooting guide below lists the the rider or mower only when the engine is most common problems, their causes and remedies.
  • Page 31: Troubleshooting

    Engineruns,but Transmission release levers in PUSH Move levers to DRIVE positions. riderwill not :)ositions. drive. Drive beltslips. Clean or replace beltas necessary. Beltis broken. Replace drivebelt. Contact S earsParts & Repair. Parking brake is notfullyreleased. Contact S earsParts& Repair. Riderdrivebelt Pulleys or beltgreasy or oily.
  • Page 33 Antes que 1-800-659-5917 arranque el motor, lea y comprenda Manual del DueSo. Servicio de ayuda Sears Craftsman 5 am - 5 pm, Lunes a Sabado...
  • Page 34 DE CRAFTSMAN Por dos (2) aSos a partir de la fecha de compra, si este equipo montable de Craftsman es mantenido, lubricado y afinado conforme alas instrucciones en el manual del propietario, Sears reparara o reemplazara sin costo alguno cualquier parte que se encuentre defectuosa en material o mano de obra conforme a los lineamientos de la cobertura enumerada a contin- uaci6n.
  • Page 35 Leaestasreglas deseguridad y sfgalas concuidado. Noobedecer e stasreglas puedeocasionar la perdida delcontrol s obrelaunidad, l esiones severas a la persona o lamuerte deusted, o espectadores, o daSos a la propiedad o alequipo.Estacubiertade la podadora es capazdeamputarmanosy piesy dearrojar _'etos. Eltriangulo _ enel textodenota precauciones o advertencias importantes quedeben obedecerse. OPERACION GENERAL uar su habilidad de operar el equipo con la suficiente...
  • Page 36 OPERACION EN CUESTAS - iL ADVERTENCIA Las cuestas son un factor importante relacionado con los acci- dentes por perdida de control y volcaduras, y pueden propiciar Nunca opere en cuestas mayores a 17.6 per ciento lesiones severas o la muerte. Cualquier operaci6n en cuestas (10 °) Io cual es una inclinaci6n de 3 1/2 pies (106 cm) exige precauciones extremas.
  • Page 37 SERVICIO Y MANTENIMIENTO 11. No quite el filtro de la gasolina cuando el motor esta caliente ya que la gasolina que se derrame se puede incen- Manejo Seguro de la Gasolina diar. No extienda las abrazaderas de la tuber[a del com- 1.
  • Page 38 CALCOMANIAS DE SEGURIDADY OPERACION Debe leer cuidadosamente y acatar todos los mensajes de PELIGRO, ADVERTENCIA, PRECAUCION y de instrucciones Esta unidad fue diseSaday fabricada para ofrecerle la seguridad en su tractor y podadora. No seguir las instrucciones puede y confiabilidad que usted esperaria de un lider en la indus- resultar en lesiones personales al cuerpo, iLa informaci6n es tria de la fabricaci6n de equipos motorizados para el exterior, para su seguridad yes importante! Las calcomanias de...
  • Page 39 GU|A SUGERIDA PARA EL AVISTAIVllENTO DE PENDIENTES PARA UNA OPERACION SEGURA DEL IVIONTABLE CON ACCESORIO CONDUZCA SOLO HACIA ARRIBAY HACIA ABAJO POR LA PENDIENTE NUNCA DE UN LADO A OTRO 10 GRADOS MAXIMO ADVERTENCIA: Para evitar lesiones graves, opere la unidad hacia arriba y hacia abjo per la pendiente, nunca de un lade a otro.
  • Page 40 Para obtener respuestas a sus preguntas sobre el pro- ducto, Ilame ah 1-800-659-5917 Fecha de Compra Servicio Telef6nico de Asistencia de Sears Craftsman, 5 am - 5 pm, Lunes - Sabado. Marca del Motor Modelo del Motor...
  • Page 41 Llenar con Gasolina FRESCA Retirar los Materiales de Empaque Quite el cart6n del caj6n de embalaje. Levante el asiento para ganar Quite el encintado de acero que sujeta acceso al tap6n de la gasolina y la unidad al caj6n de embalaje. Ubique al tanque.
  • Page 42 Palanca de Control Palanca de de Velocidad de "_ Velocidad de Avance Izquierda Avance Derecha & Freno de Mano Ajuste de Altura de Corte Palancas de Velocidad - Palancas de Velocidad - Posici6n de DRIVE Posici6n de PARK hogador (Cerrado) Ahogador l Jl (Abierto)
  • Page 43 Interruptor de Cuchillas de la Sesgadora Ajuste Sesgadora de Altura de Corte de la Para aumentar la altura de corte de la sesgadora (elevar El interruptor de cuchillas de la sesgadora amarillo activa la cubierta de la sesgadora), oprima la parte superior del y desactiva las cuchillas de la sesgadora.
  • Page 44 VERIFICACIONES ANTES DE ARRANCAR • Verifique que el aceite del carter este en la marca de Ileno de la varilla de nivel de aceite. • Llene el tanque de gasolina con combustible fresco. RECOMENDACIONES DE COMBUSTIBLE Para operaci6n diaria: Use s61ogasolina sin plomo donde la calcomanfa de la bomba indique un octanaje de 87 o mayor, El gasohol (hasta 10% de alcohol etflico, 90% de gasolina sin plomo por volumen) esta aprobado como combustible, El...
  • Page 45 PARO DE EMERGENCIA EMPUJAR EL MONTABLE MANUALMENTE En caso de emergencia, el motor puede detenerse simple- 1. Desactive las cuchillas de la sesgadora, empuje las mente girando el interruptor de encendido a STOP (paro). Use palancas de control de velocidad de avance a la posi- este metodo s61o en situaciones de emergencia.
  • Page 46 PRACTICA DE MANEJO Traslado sin prob- lemas MANEJO BASICO Los controles de palanca ADVERTENCIA: Nunca opere en cuestas mayoras a 17.6% del tractor de giro cero son (10°). Vea OPERACION EN CUESTAS en la seccion de altamente sensibles. seguridad. Los tractores de giro cero operan de mode difer- El MEJOR metodo de ente a otros vehfculos de cuatro ruedas.
  • Page 47 Prbctica de dar Vuelta en una Esquina Lugar Prbctica de Vuelta en el Mientras viaja hacia adelante permita que una palanca Hacer un "giro cero" significa girar en el mismo lugar. regrese gradualmente en direcci6n del neutral. Practique Para dar la vuelta en el mismo lugar, gradualmente varias veces antes de podar el cesped.
  • Page 48 REMOCION E INSTALACION DE LA 5. Use el ajuste de altura de corte de la sesgadora para ele- var la sesgadora hasta que ya no descanse sobre los blo- CUBIERTA DE LA SESGADORA ques de madera de 4x4 (E). 6. Gire el interrupter de encendido a OFF (apagado) y quite la NOTA: Ejecute la remocion e instalacidn de la sesgadora sobre Nave.
  • Page 49 PROGRAMA DE MANTENIMIENTO El siguiente programa debe seguirse para el cuidado normal de su tractor y podadora. MANTENIMIENTO DEL MONTABLE, de todos los Antes de Primavera y Anual modelos cada uso Verano Horas Horas Horas Horas mente Limpie el residuo del montable y del compartimiento •...
  • Page 50 Elementos de Mantenimiento del Tractor GANAR ACCESO AL COMPAR- TIMIENTO DEL MOTOR Levante la parte posterior del asiento para ganar acceso al compartimiento del motor. LIMPIAR DESPOJOS DEL TRACTOR Y DEL COMPARTIMIENTO DEL MOTOR Figura 12. Ganar acceso al compartimiento motor Intervalo de Servicio: Antes de cada uso.
  • Page 51 LUBRICACION Intervalo de Servicio: 25 horas. Lubrique la unidad en los lugares mostrados en las Figuras 15 a 19 asf como en los siguientes puntos de lubricaci6n. Grasa: • engrasadores de la rueda delantera • bujes de la rueda delantera •...
  • Page 52 LIMPIAR CUBIERTA Y VERIFICAR/ REEMPLAZAR ASPAS DE PODADORA Intervalo de Servicio: 25 horas o segQn se requiera. ADVERTENCIA Para su seguridad personal, no maneje las aspas afiladas de la podadora con las manos descubiertas. El manejo imprudente o indebido Afloje de las aspas puede resultar en lesiones graves, - IL ADVERTENCIA Figura 20.
  • Page 53 LIMPIAR BATER|AY CABLES ADVERTENCIA REVISAR SISTEMA SEGURIDAD DEL MONTABLE Peligro de corrosibn. Las baterias contienen acido. Conserve la bateria siempre de pie y no derrame el electrolito. Intervalo de servicio: Cada 100 horas, cada primavera y Evite el contacto con la piel y los ojos. otoSo y despues de estar guardado per mas de 30 dfas.
  • Page 54 VERIFICAR/AJUSTAR EMBRAGUE DEL PTO ADVERTENCIA Para evitar lesiones graves, s61o haga los ajustes con el motor detenido, la Ilave quitada y el tractor en terreno nivelado. Intervalo de Servicio: 200 horas. El embrague de la Potencia de arranque (Power Take Off o PTO) acciona las cuchillas de la sesgadora.
  • Page 55 Elementos de Mantenimiento Use aceite de Servicio clasificado para API de Clase SG, SH, SJ o mejor con viscosidad SAE. del Motor VERIFIQUE EL NIVEL DE ACEITE DEL 4BEn Im i P, MOTOR Service Interval: Before each use, and every 8 hours. 4rim 1.
  • Page 56 REEMPLACE EL FILTRO DE AIRE Intervalo de servicio: Cada 25 horas o cada dos meses, o conforme sea necesario. 1. Afloje los botones de la cubierta del filtro de aire (A, Figura 28) y remueva la cubierta (B). Limpie cualquier residuo alrededor del filtro de aire.
  • Page 57 AJUSTE DE PALANCA DE CONTROL AJUSTE DE EMBRAGUE DEL PTO DE VELOCIDAD Vea REVISAR / AJUSTAR EMBRAGUE DEL PTO en la secci6n de Mantenimiento. Las palancas de control tienen tres ajustes: Para Ajustar la Altura de las Palancas de Control: Jale las palancas hacia adentro, encima del regazo del operador a la posici6n de DRIVE.
  • Page 58 AJUSTE DEL FRENO AJUSTES DEL MOTOR 1. Pare la unidad, Gire la ignicion en la posicion OFF (apaga- El motor esta diseSado para brindar un rendimiento correcto do), coloque las palancas de velocidad en suelo en la posi- bajo todas las condiciones de operacion. Cualquier tipo de ci6n PARK (parado), y espere a que todas las piezas que ajustes deberan ser efectuados por Sears u otto taller de servi- cio calificado.
  • Page 59 AJUSTE DE NIVEL DE LA CUBIERTA DE LA PODADORA rA ADVERTENCIA Antes de realizar ajustes a la sesgadora, desactive las cuchillas de la misma, gire el interruptor de encendido para apagar el motor, quite la Ilave y espere a que se detengan todas las piezas mbviles. Desconecte el cable de bujias y sujetelo lejos de la misma.
  • Page 60 Figura 36. Orientar las Aspas de Adelante hacia Atras Nivelado de Adelante hacia Atrbs 1. Gire las aspas de adelante hacia atras como se muestra en la Figura 36. Mida la distancia del suelo a la punta delantera del aspa central, y del suelo a la punta trasera de las aspas izquierda y derecha (Figuras 33 y 36), Las Figura 37.
  • Page 61 ALMACENAMIENTO ADVERTENCIA Antes de almacenar su unidad en la temporada baja, lea las instrucciones de Mantenimiento y Almacenamiento Nunca almacene la unidad (con combustible) en en la secci6n de Reglas de Seguridad, luego realice los una estructura cerrada con poca ventilacibn. siguientes pasos: vapores del combustible pueden viajar a una •...
  • Page 62 tLADVERTENCIA Si Io prefiere, todos estos procedimientos pueden ser ejecutados para usted per un Para evitar lesiones graves, realice el mantenimiento del tractor o la Centre de Partes y Reparaciones podadora solo con el motor apagado y el freno de mano en PARK. Sears.
  • Page 63 El motoropera Laspalancas d edesembrague de la Mueva laspalancas a laposici6n de DRIVE. peroel tractor transmisi6n e nposici6n de EMPUJAR. no avanza. Labandadetracci6n sebarre. Limpie o reemplace l abandasegOn seanecesario. Labandaestarota. Reemplace banda. Contacte Partes y Reparaciones deSears. Freno demanonoestadesaccionadoContacte Partes y Reparaciones deSears. Bandadetrac- Poleas o labanda congrasao aceite.
  • Page 65 RepairParts PTS - 1...
  • Page 66 Frame, Body & Seat Group ZTS 7500 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, To be assembled between Ref. Nos. 64 114 33 & 57 _'_- Torque Ref. No, 11 to 150 Ft. Lbs, or 204 Nm.
  • Page 67 Frame, Body & Seat Group ZTS 7500-107.28791 DESCRIPTION REF NO PART NO. QTY. 1733448ASM CASTER ASSEMBLY 1960160SM WASHER, 3/4 ID x 1.60D x .05 THK 1611710SM RING, Klipring, 3/4 1734135SM CAP, Hub 1730186SM BUSHING, Axle Pivot 1733426ASM AXLE, Casting (Includes Ref. Nos. 1,2, 3, 4 & 5) 1733571SM BOLT, Shoulder, G5 1960687SM...
  • Page 68 Frame, Body & Seat Group ZTS 7500 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, To be assembled between Ref. Nos. 64 114 33 & 57 _'_- Torque Ref. No, 11 to 150 Ft. Lbs, or 204 Nm.
  • Page 69 Frame, Body & Seat Group ZTS 7500-107.28791 DESCRIPTION REF NO PART NO, QTY, 1921221SM CAPSCREW, 5/16, 18 x 1-1/2 1919381SM WASHER, 5/16, .34 ID x 10D x .13 THK 7090189SM LOCKWASHER, External Tooth, 3/8 7024340SM SPACER 7102378SM TANK, Fuel Assembly (Includes Ref. Nos. 43, 44 & 50) 1734320SM CAP, Fuel Tank 1921977SM...
  • Page 70 Engine Group - 26HP Kohler ZTS 7500 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, left side between rear shroud &fueI tank Torque Ref, No, 25 to 10-12 Ft. Lbs. or 135-16.3 Nm. Tie clutch wire 4 y/'<) to Ref.
  • Page 71 ZTS 7500-107.28791 Engine Group - 26HP Kohler REF NO PART NO. QTY. DESCRIPTION 7027266SM CAPSCREW, Hex Head, 7/16-20 x 2-3/4, G5 1918199SM LOCKWASHER, Spring 1708264SM WASHER, Hex, 7/16 2832747SM TIE, Self-Locking, 3.62" 1686880SM CLUTCH, Electric Ogura 2828635SM SCREW, Hex Washer Head Taptite, 3/8-16 x 1-1/4 1924940SM WASHER, 3/8 7101717SM...
  • Page 72 Transmission Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Black Rod_. JY _Ref. Nos. 5 & 6 to be posi' tiened withbends "_ t_ward c enter l ine Yellow Rod PTS - 8...
  • Page 73 Transmission Group ZTS 7500-107.28791 REFNO PART NO. QTY. DESCRIPTION 1960223SM CARRIAGE BOLT, 5/16-18 x 1-1/4, G5 1919381SM WASHER, .34 ID x 10D x .13 THK 1703900SM SPACER 1960684SM NUT, Hex Keps, 5/16-18 1727555SM ROD, Control L.H. 1727556SM ROD, Control R.H. 1727831SM BOLT, Shoulder 1930650SM...
  • Page 74 Transmission Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Black Rod_. JY _Ref. Nos. 5 & 6 to be posi' tiened withbends "_ t_ward c enter l ine Yellow Rod PTS - 10...
  • Page 75 Transmission Group ZTS 7500-107.28791 REFNO PART NO. QTY. DESCRIPTION 1728073SM PULLEY, 4-1/2" Transmission 1728074SM FAN, 6" Transmission 1728075SM PARKING BRAKE ARM ASSEMBLY, Transmission 1728060SM HYDRO SEAL KIT 1687329SM HUB REPLACEMENT KIT (Includes Ref. Nos. 52 & 53) HUB, EZT Transmission (Included in Ref.
  • Page 76 Controls Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Handlebarsout (locked) compress 6 - 12 Ibs inward force measured brakespring to 3" length. 1'<above bottom of foam grips (both sides), Brakearm to befully nested in gear teeth, /e i ®...
  • Page 77 Controls Group ZTS 7500-107.28791 REFNO PARTNO. QTY. DESCRIPTION 1725927SM SHAFT, Cross 1960027SM WASHER, 1/2 1703805SM RING, Klipring Extension 1921977SM CAPSCREW, Hex Head, 5/16-18 x 1-1/4, G5 1920161SM NUT, Hex Jam, 5/16-18 1960717SM NUT, Speed, 5/16-18 Lug Type 1960686SM NUT, Hex Flange, 5/16-18 ESNA 1728009ASM BRACKET, L.H.
  • Page 78 Controls Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Handlebarsout (locked) compress 6 - 12 Ibs inward force measured brakespring to 3" length. 1'<above bottom of foam grips (both sides), Brakearm to befully nested in gear teeth, /e i ®...
  • Page 79 Controls Group ZTS 7500-107.28791 REFNO PARTNO. QTY. DESCRIPTION 1960694SM NUT, Hex Flange, 1/4-20 ESNA 1925003SM SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2 Footnotes PTS - 15...
  • Page 80 Electrical Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, Seat Switch 5 --_____ @ Tie switchto cable _- @ connector body HeadlighlSwitch (Optional) -_. Tie Harness to lhrotlle cable //_/'/ • Fleadiig_ (Optional) Electric Clutch...
  • Page 81 Electrical Group ZTS 7500 - 107.28791 REFNO PART NO. QTY. DESCRIPTION 1732006SM SWITCH, Push Button 1686734SM SWITCH ASSEMBLY, Ignition, 5/8-32 6 Pin Indak (Includes Ref. Nos. 3, 4 & 5) 1960547SM LOCKWASHER, Internal Tooth, 5/8 Thin 1717549SM NUT, Hex Flange, 5/8-32 IGN SW Die Cast 1717550SM COVER, Ignition Switch 1717163SM...
  • Page 82 Lift Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, \XAdjust Ref. No. 1121_¢ with threadgoing 33 J Positionfor 50" & 42" Mower Positionfor 44" Mower PTS - 18...
  • Page 83 Lift Group ZTS 7500-107.28791 REFNO PART NO. QTY. DESCRIPTION 1922007SM NUT, Hex Jam, 7/16-14, NC-2B 1734042SM TRUNNION 1733381SM ROD, Bail 1733535ASM ARM, Mower Lift L.H. 009X67MA BOLT, Shoulder 1931277SM NUT, Hex Whiz Lock Flange, 5/16-18 1931211SM NUT, Hex Whiz Lock Flange, 3/8-16 094067MA PIN, Threaded Shoulder 1960170SM...
  • Page 84 Wheel & Tire Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, Torque Ref. No. 8 to 45-50 ft. lbs. or 61.2-68 Nm. /_" PTS - 20...
  • Page 85 ZTS 7500-107.28791 Wheel & Tire Group REFNO PARTNO. QTY. DESCRIPTION 1726383SM WHEEL & TIRE ASSEMBLY, 18 x 8-1/2-8 7091772SM CAPSCREW, Hex Head 7035359SM TUBE, Caster Wheel Spacer 1734013SM WHEEL & TIRE ASSEMBLY, 11 x4-5 7090839SM NUT, Hex Center Lock 2812808SM FITTING, Lube 2172353SM VALVE STEM &...
  • Page 86 Decals Group ZTS 7500 - 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, REARVIEW PTS - 22...
  • Page 87 1734335SM DECAL Height of Cut 7102363SM DECAL Belt & Blade 1734270SM DECAL Handle Control, L.H. 26HP 1734136SM DECAL Seat Deck L.H. Craftsman ZTS 1734137SM DECAL Seat Deck R.H. Craftsman ZTS 1734271SM DECAL Handle Control R.H. 1734272SM DECAL Instrument Panel 1734276SM...
  • Page 88 50" Mower Deck - Clutch & Support Group ZTS 7500 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, PTS - 24...
  • Page 89 50" Mower Deck - Clutch & Support Group ZTS 7500 107.28791 DESCRIPTION REF NO PART NO. QTY. 1732204SM V-BELT, Arbor Drive, 91.1 Kevlar (Used on 50" Models) 1734131SM V-BELT, P.T.O. Drive, 73.24 A-Wedge (Used on 50" Models) 1922918SM CAPSCREW, Hex Head, 3/8-16 x 3-1/4, G5 1924940SM WASHER, Flat, 3/8 2101096SM...
  • Page 90 50" Mower Deck - Housing & Arbor Group ZTS 7500 107.28791 NOTE: Unless noted otherwise, use the standard hardware torque specification chart, Torque Ref. No. I to 55-75 Ft. Lbs. or Run Ref. No, 42 on with .06=Thread Showing _J 42 Torque Ref.
  • Page 91 ZTS 7500-107.28791 50" Mower Deck - Housing & Arbor Group REF NO PART NO. QTY. DESCRIPTION 1714419SM NUT, Hex Flange, 9/16-18 1713675SM WASHER, Belleville 1732951SM PULLEY, Deep Groove, 4.6 1713158SM HUB, Spacer 1713098SM PULLEY 1713533SM 1713197SM 1655729ASM HOUSING, Arbor Top 7013313SM BEARING 1715724SM...
  • Page 92 Kohler Engine Parts - SV735-0018 ZTS 7500 - Model No. 107.28791 Crankcase = Group Oil Pan / Lubrication = Group ® 22 \_ 21 /S 17 _ 17--Q Crankshaft = Group PTS - 28...
  • Page 93 Kohler Engine Parts - SV735-0018 ZTS 7500 Model No. 107.28791 RE}:. PART DESCRiPTiON RE}:. PART DESCRiPTiON SPECIAL PARTS OiL PAN/LUBRICATION - Group 3 32 522 03 SV710-740 SHORTBLOCK 32 199 07-S PAN ASSEMBLY, OIL (INCLUDES 2-14) 32 086 01-S SCREW, SHD THD FRM M6x1.0x26.5 CRANKSHAFT - Group 1 32 393 10-S...
  • Page 94 Kohler Engine Parts - SV735-0018 ZTS 7500 - Model No. 107.28791 Head/Valve/Breather - Group 2 32__3331J_ 1-19 --20 _!_i_, _-_i_ 27 _ 26 _ 25_@ 24 _ _J23 PTS - 30...
  • Page 95 Kohler Engine Parts - SV735=0018 ZTS 7500 Model No. 107.28791 RE}:. PART DESCRiPTiON REF. PART DESCRiPTiON HEAD/VALVE/BREATHER =Group 4 24 755 141-S KIT, PLAIN ROCKER COVER (INCLUDES 2[QTY 1], 3[QTY 4]) 24 153 30-S O-RING, VALVE COVER M-651030-S SCREW, FLG M6X1.0X30 32 318 05-S KIT, #1 CYLINDER HEAD ASSY...
  • Page 96 Kohler Engine Parts - SV735-0018 ZTS 7500 - Model No. 107.28791 Blower Housing & Baffles - Group 6 ignition / Electrical - Group 5 Q j3 Fuel System - Group 8 Starting System - Group 7 PTS - 32...
  • Page 97 Kohler Engine Parts - SV735=0018 ZTS 7500 ModeJNo. 107.28791 REF. PART DESCRiPTiON REF. PART DESCRiPTiON IGNITION/ELECTRICAL =Group 5 FUEL SYSTEM - Group 8 32 162 03-S SCREEN, GRASS 32 853 08-S KIT, CARBURETOR W/GASKETS 12 086 14-S SCREW, FLG M10X1.5X45 (INCLUDES 2,3) 12 468 03-S WASHER, FLAT 13/32"...
  • Page 98 Kohler Engine Parts - SV735-0018 ZTS 7500 - Model No. 107.28791 Decals - Group 12 Air Intake/Filtration - Group 10 Artwork is representative. Actual labels may differ depending on model specification number. Engine Controls - Group 9 Exhaust-Group11 PTS-34...
  • Page 99 Kohler Engine Parts - SV735-0018 ZTS 7500 ModeJNo. 107.28791 RE}:. PART DESCRiPTiON RE}:. PART DESCRiPTiON ENGINE CONTROLS - Group 24 211 03-S BOLT, RD HD SQ NECK M6X1.0X25 24 090 51-S LEVER, GOVERNOR M-641060-S NUT, FLG M6X1.0 24 089 01-S SPRING, LINKAGE 25 158 08-S BUSHING, LINKAGE RETAINING...
  • Page 100 Hardware identification& TorqueSpecifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance _+20%) Washer © © © ((((((1((((((((((((() ((((((((/((((((((/( Q Hardware Lockwasher Grade Carriage Belt SAEGrade 2 SAEGrade5 SAEGrade8 11111(11(1111111(11( } (1111(1111111((111(10 _HexNut Size Of in/Ibs in/Ibs in/Ibs...
  • Page 101 Congratulations on making a smart purchase. Your new Felicidades por su compra inteligente. Su nuevo Craftsman® product is designed and manufactured for producto de Craftsman® rue disefiado y fabricado para years of dependable operation. But like all products, it afios de operaci6n confiable. Pero como todos los may require repair from time to time.
  • Page 102 Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it or who sold it! For the replacement parts, accessories, and owner's manuals that you need to do-ibyourself, For Sears professional installation of home appliances and items like garage door openers and water heaters,...

This manual is also suitable for:

107.28791