Craftsman ZTS 7500 Operator's Manual page 10

Figure 7. Remove Baffle and Hardware
A. BaffJee
B. Carriage Bolts
C. Nuts
D. Mower Deck Housing
iNSTALL BLOWOUT BAFFLES
1, Remove and discard existing baffles (A, Figure 7)
carriage bouts (B) and nuts (C) from mower deck
housing (D),
2, UnstaHLH baffle (A, Figure 8), and secure with
5/16-18 x 5/8 carriage bouts (C) and 5/16-18 Whiz
Lock nuts (D),
3, UnstaHRH baffle (B), and secure with 5/16-18 x 5/8
carriage bouts (C) and 5/16-18 Whiz Lock nuts (E),
Figure 8. Blowout Baffle Installation
A. Baffle, LH
B. Baffle, RH
C. Carriage Bolts, 5/16-18 x 5/8
D. Nut, Whiz Lock, 5/18-18
10