Configuring Isdn Bri Hardware; Contents; Hardware Requirements - Nortel 1000 Installation And Commissioning Manual

Configuring ISDN BRI hardware

Contents

This section contains information on the following topics:
"Hardware requirements" (page 53)
"Configuring ISDN BRI trunking with IP expansion cabinets or MG 1000S
systems" (page 55)

Hardware requirements

This section contains the hardware requirements for:
•
•
Line and packet data applications
Table 12 "Hardware requirements for line and packet data applications"
(page 53)
on the system.
Table 12
Hardware requirements for line and packet data applications
Hardware
MISP circuit card
SILC circuit card
UILC circuit card
Copyright © 2003-2007, Nortel Networks
.
"Line and packet data applications" (page 53)
"ISDN BRI trunking" (page 54)
"Summary" (page 56)
"Installation procedures" (page 58)
line and packet data applications
ISDN BRI trunking
lists the hardware required to configure line and packet data
Product code
NTBK22
NT6D70AA
NT6D70BA
NT6D71
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
Description
The MISP card (NTBK22) is specific to Small
Systems and CS 1000S systems. It performs Data
Link (Layer 2) and Network (Layer 3) processing
associated with the OSI protocol.
-48V North American S/T interface line card
-40V International S/T interface line card
U interface line card
53