Setting An Operating Configuration - HP Surestore 1200ex - Optical Jukebox User Manual

CAUTION
Operating the Jukebox

Setting an Operating Configuration

Setting an Operating Configuration
>
READY ADMIN *
You can set configurations to customize the way the jukebox operates.
Start with READY in the display.
1. Press until ADMIN * displays.
NEXT
2. Enter the administration password.
Instructions for entering this password are in "Entering the Administration
Menu Password" previously in this chapter.
3. TEST * displays. Press
4. Press or
NEXT PREV
and then press
ENTER
If the configuration has multiple settings, the current setting flashes. Otherwise,
the configuration is set and a confirmation message displays.
5. If the current configuration setting is flashing, press
desired setting displays, and then press
then the configuration's name and setting displays.
6. Press to return to READY.
CANCEL
Turning off the jukebox in the next step could cause data loss if not done correctly.
Do not turn off power to the jukebox until you are sure the SCSI bus is inactive.
Removing power from a SCSI device when the bus is active can result in data loss
and/or indeterminate bus states. Check your host system manuals for information
about checking the SCSI bus status. If your computer is connected to a LAN, be sure
to check with your system administrator before turning off power to the jukebox.
7. Turn the jukebox OFF, then ON to save the configuration to the jukebox flash
ROM.
Configurations are described in the following table.
3-20
>
CONFIG *
until CONFIG * displays, and then press
NEXT
until the name of the configuration you wish to set displays
. (Configurations are described on the following pages.)
ENTER
or until the
NEXT PREV
. OPTION SAVED displays and
Chapter 3
.
ENTER