Table of Contents
Advertisement
Theoriginal sound c anbe
replaced with
new sound using the built-in PaJmoorder
microphone.
2PLAY
_A.DUB
i Before you begin-
,
Turn on the Palmcorder.
insert a pre-reoerded tape to be dubbed. /
The origina_ sound is recorded onl
ST (Stereo) 1, and the new
t
sound will be recorded on ST
2.
The original sound is replaced
with the new sound.
* Select 12 bit if you do not want the
original sound to be completely
replaced
during an audio dub.
, With tape containing both 12 bit end
16 bit audio, p_ease note that if dubbing is
started in a 16 bit portion, the 12 bit audio
will also be completely replaced.
Set POWER to VCR.
• (f you have the optional Remote
Control, you can set the Paimcorder to
stop automatically at a specified point
oh the tape. See "Memory-Stop
Editing" on page 44.
Press _. (PLAY). Then press
II (PAUSE) where you want dubbing to
begin.
Press MENU to display the VCR
FUNCTIONS menu screen.
Rotate JOG KEY to se/ecl
JOG KEY to display the RECORDING
SETUP menu screen.
Rotate JOG KEY to seLeot _
_,
and then press JOG KEY to
select ON.
• The Palmcorder will go to Stand By
mode, and ",&..DUB It' indication
appears in the EVF or the LOD
monitor. Go to step 4.
Press A.DUB on the Remote Control
• The Pa]mcorder will go to Stand By
mode, and "A.DUB ir indication
appears in the EVF or the LCO
monitor. Go to step 4.
(Continued
on next page.)
43
Advertisement
Table of Contents
