Important Note - Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual

O WARNING Indication (p. 58)
The warning displays appear in the
EVF and the LCD monitor.
Counter/Time Code
The indication switches as shown
below when the desired "C. DISPLAY"
mode is selected from the menu.
(Menu OSD: pp. 66, 68)
LinearTime Counter Memory Counter
Time Code
Memory Counter M 0:00.00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00.00 dudng audio
dub, fast forward, or rewind.
Time Code 0h00m00s00f
The Palmcerder calculates and displays
exactly where you are on any tape in terms
of hours, minutes, seconds, and frames
(30 frames = 1 second).
• This display cannot be reset.
70
IMPORTANT NOTE:
• Display must be set to ALL for MF, AE,
WBALANCE or BACK LIGHT indications
to be displayed on the EVF or LCD Panel
when selected.
• C.RESET does not work when C. DISPLAY
is set to T.CODE
_Tape Mode Indications
REC Recording,
PHOTO PhotoShot recording.
PAUSE Paused during recording.
E> Playback.
II Still.
ID Slow (forward).
<31 Slow (reverse).
I1>
Frame Advance (forward).
411 Frame Advance (reverse).
R D Repeat Playback.
CHK Recording Check.
FF Fast forward.
REW Rewind.
[::>D FF Search.
REW Search.
BLANK Blank Search.
SEARCH Index Search.
O MAGICPIX Indication (p. 39)
This display appears when MAGIC
PIX is pressed.