Before You Begin - Panasonic MultiCam PV-DV202-K Operating Instructions Manual

View Recording/Playback on
your TV
[ TV with AUDIO/VIDEO IN Jacks ]
Audio In
A/V Cable
(Supplied)
To Audio In
[ TV with S-VIDEO IN Jacks ]
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV.
DC Cable
(Supplied)
AV Cable
(Supplied)
To Audio In
S-Video Cable
(Not supplied)
DV202_402-K.p 36-39.p65
Special Effect Features

Before you begin

• When using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal. (PV-DV402-K only) (p. 15)
1
Set POWER to CAMERA or VCR.
To view what the Palmcorder is
recording or to playback a tape on your
TV.
A/V OUT
Note
• For PV-DV402-K users:
When using VCR mode, first set to
Back of TV
AV-JACK "OUT/PHONES" in the VCR
Mode Menu. (Menu OSD: p. 104)
Video In
2
Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
for further information.
To Video In
3
Start playback or begin a recording.
• Make sure the Palmcorder and TV are
turned off while connecting.
• Please connect the A/V Cable securely.
S-VIDEO OUT
(PV-DV402-K only)
Note
A/V OUT
(Remote Control Only)
Back of TV
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on the remote control.
Audio In S-Video In
Press again to remove the indications.
DISPLAY
ON TV
To S-Video In
39
39
2003/06/12, 10:14