Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 9

You can operate the major functions of your Palmcorder from up to approximately 5 m
(16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder
and press the desired buttons (Remote Sensor is located under the lens).
To operate Camera functions:
Set POWER to CAMERA.
Remote Sensor
To operate VCR functions:
Set POWER to VCR.
Controlled Functions
Rec/Pause (p. 18)
Tele (Zoom) (p. 21)
Wide (Zoom) (p. 21)
Date/Time (p. 69)
Reset (p. 44)
PhotoShot (p. 20)
Display On TV (p. 37)
Counter/Time Code (p. 70)
Audio Dubbing (p. 43)
Record (p. 46)
Menu (p. 17)
Play (p. 30)
• FF/Search (p. 32)
• REW/Search (p. 32)
• Pause/Select (p. 34)
• Stop/Set (pp. 16, 17, 30, 46)
• Slow/Frame Advance (Forward)
(pp. 33, 34)
• Slow/Frame Advance (Backward)
(pp. 33, 34)
• Index Search (Forward) (p. 35)
• Index Search (Backward) (p. 35)
• Speaker Volume (p. 31)
Insert a slender pointed object, such as the tip of a ball-
point pen into the slot so that it fits into the hole (as shown
A). Then, while sliding to the dght, pull the Battery Tray
out with your fingernail.
Insert the battery into the Battery Tray with the _'_ mark
facing down.
Do not reverse the polarity.
Insert the Battery Tray.
Replace battery with Panasonic PART NO. VSBW0004 (0R2025) only. Use of another •
battery may present a risk of fire or explosion.
aution: battery may explode if mistreated. Dispose of used battery properly. Keep
way from children. Do not recharge, disassemble or dispose of in a fire.
#
9