k
lllJll =Jlt J
l=l
W"J eJLwJJJJe
j
Li_I i j!ll |_J_'.'.'.'.'.'.'.'.l
I11,] I] Lrj _
i (,,]
The LCD (Liquid Crystal Display) monitor
4
can be used while recording.
|
Use OPEN tab on underside of the LCD
monitor to unlock.
90 °
1
OPEN
Swing the LCD monitor fully open
and adjust the viewing angle.
. The LCD monitor will automatically
turn On,
• When the LCD monitor is completely
closed, it will shut off automatically to
save power.
• Adjust the LCD Brightness and/or
color of the LCD monitor if necessary.
Piease refer to "To adjust the LCD/
EVF BRIGHTNESS
or COLOR"
below.
Start recording.
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
2, 3,
JOG KEY
1,5
MENU
/ EVF/LCD
Prees
MENU
to display
the main menu
screen.
3
4
5
Rotate JOG KEY to select _
_rom
the main menu screen.
(Menu OSD: pp. 66, 68)
Press JOG KEY to display the LCD/
EVF SETUP screen.
Press JOG KEY to select LCD
BRIGHTNESS,
LCD COLOR, or
EVF BRIGHTNESS,
then rotate JOG
KEY to adjust.
Press MENU twice to exit this mode.
19