Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 15

Caution:
• Charge on+y with specified charger.
• Charge the Battery within an ambient
temperature range of 10 '_C (50 '_F) and 30 °C
(86 "F).
• The Battery may be warm after charging or jasI
after usa, This is normal,
• Do not use an insufficiant+y charged or worn
out Batiery.
• if charging is done in extreme low or high
temperatures, Battery charge time increases,
Safety precautions:
• Do not plase the Battery near, or dispose of in fire.
• DO not directly sennebl (short circuit) the
positive (+) and negative (-) terminals.
• Never attempt to disassemble or reassemble
the Batiery.
To avoid damage to the Battery:
• Do not drop or jar 1he Battery.
• Use the Battery with specified models only.
• If the Battery is used in extremely high
temperatures, a safety device will automatically
prevent operation.
To insure longer battery life:
• While not in use, remove Battery from the
Palmeorder and AC Adaptor and store in a
cool, dark, dry place, if you leave the Battery
in the Palmcardar or on the AC Adaptor, the
Battery will no longer be reehargeable.
• Keep the Battery terminals clean.
I U.S.A._ONSUMERS: ATTENTION: 1
A lithium ion/polymer battery that is recyc_ablepowers the product
you have purchased. P}ease call 1-800-8-BATTERYfor information on
how to recycle this battery.
DC Cable
(Supplied)
O
BATTERY
RELEASE
Slide the Battery downward while
sliding BATTERY RELEASE to
remove the Battery Pack. (p. 14)
Insert the DC Cable into the DC IN
Terminal.
Connect the other and of the DC
Cable to the AC Adaptor as shown.
Plug in the AC Adaptor.
• The POWER Lamp on the AC
Adaptor lights up.
• i°
POWER
• When not in use, unplug the AC Adaptor
the AC outlet. (AC Adaptor consumes
of electric power when plugged into
_= _-'1_ an AC outlet even when not in use.)
O _DC Output Connector
15