Easy Cassette Eject/Insertion; Before You Begin; Attaching The Shoulder Strap; Hand Strap - Panasonic PV-DV103-K Operating Instructions Manual

Palmcorder
Table of Contents

Advertisement

Easy Cassette Eject/Insertion

• If the Palmcorder is connected to a power
source, the cassette can be inserted and
ejected without turning the Palmcorder on.
3
1
TAPE EJECT
CLOSE
Note
• When inserting the cassette, make sure it
is facing the right direction and then push
it in completely.
• If Hand Strap is tight it may prevent
Cassette Holder from fully opening for
Cassette insert or eject. Loosen Hand
Strap if necessary.

Attaching the Shoulder Strap

1
Undo the two strap ends from their
buckles.
2
Thread the strap end
through the Strap
Attachment Rings.
• Tilt Viewfinder upward.
3
Reinsert the strap ends through
their buckles.
• Make sure the straps
are not twisted.
Adjust the Length
1
Loosen the strap from the Buckle and
create a loop.
2
Pull the strap firmly through the
Buckle to shorten or lengthen the
strap.
DV103-K.p 5-8.p65

Before you begin

• Connect the Palmcorder to a power
source. (pp. 14, 15)
1
PUSH
Slide TAPE EJECT to open the
Cassette Compartment Cover.
2
Insert a cassette record tab up,
Cassette
window side facing out.
Compartment
Cover
3
Press PUSH CLOSE to close the
Cassette Compartment Cover.
• To remove the cassette...
Slide TAPE EJECT to open the Cassette
Compartment Cover and pull the cassette
tape straight out.

Hand Strap

Adjust the length of the Hand Strap to the
size of your hand as illustrated.

Lens Cap

Attaching the Lens Cap Strap:
Thread the Lens Cap Strap through the
Strap Attachment Ring as shown.
2
3
1
Attaching the Lens Cap Strap to the
Hand Strap:
Remove the Hand Strap from the front
clasp and thread the Strap through the loop
in the Lens Cap Strap. Reattach the Hand
Strap.
1
7
Before Using
1
2
3
Hand Strap
2003/06/11, 13:18
7

Advertisement

Table of Contents
loading

Table of Contents