Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 48

I ilLw'A Lw'ILoJJJ] _t-,_J'J[qlJLUAll
i'_ -" Ill (O_VklJ !1_1 [g I]_ L,L_I 0_1 [,] _4in
An image recorded on the DV Tape can be transferred to your PC (Personal Computer).
• IBM PC/AT or compatible
• InteP Pentium _ Processor
• Microsoft Windows 95/g5/MeiNT4.0i
2000/XP
• RAM: 16 MB or more
• 2 MB minimum available hard disk space
• 256 color monitor (full color recommended)
• 3.5 inch 1.44 MB floppy disk drive
(for installation)
• RS-2320 serial port (D-Sub 9-pin)
An adaptor (D-Sub 9-pin male to a
D-Sub female) is required for a
• D-Sub 25-pin
Mouse or other pointing device
*Satisfy the conditions recommended by Microsoft for Windows.
RS-232C Serial port
(D-Sub 9-pin)
(Default is COM1.)
2
PC Connecting Cable for Windows
(optional: PC Connection Unit (PV-DRS2A, p. 51))
Turn off your PC.
Connect the Palmeorder to your PC (Windows) using the PC connecting cable
(optional: PC Connection Unit (PV-DRS2A, p. 51)).
• Before connecting the Palmcorder to the PC, make sure the PC
power is off to insure that images are transferred properly.
Turn on your PC.
Set the Palmcorder POWER to VCR.
• For extended periods of use, it is recommended to use the AC Adaptor as a power
source.
• Refer to PC or Windows manual to identify which COM port is to be used for connection.
48