Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 10

You can control any two Panasonic
Palmcorders with one Remote control
(Optional). In order for the remote to
distinguish between the two units, it is
necessary to set one of the Palmcorders to
VCR 2. On the remote, press VCR 1 or
VCR 2 to control the desired Pa]mcorder.
3,4
JOG KEY
2MEN
1 POWER
For VCR 2:
buttons at the
same time.
For VCR 1:
buttons at the
same time.
1
2
3
4
Set POWER to VCR or CAMERA.
• The POWER Lamp lights red.
• Be sure POWER is fully turned to
VCR or CAMERA position.
Press MENU to display the VCR or
CAMERA mode menu screen.
Rotate JOG KEY to select_
_in the CAMERA or VCR
mode menu screen, then press JOG
KEY to display the OTHER
FUNCTIONS menu screen.
Rotate JOG KEY to selectS,
and then press JOG KEY to select
VCR 2. (Menu OSD: pp. 66, 68).
Leave the other Palmcorder set to
VCRI.
Set the Remote Control (Optional) to
VCR 1 or VCR 2 to correspond with
the Palmcorder you wish to control.
(See above left.)
• After replacing the Remote Control
Battery, the remote will default to VCR 1.
I _rcJFJ!
• When the Palmcorder and remote are
not set to the same mode (VCR1 or
VCR2), "CHECK REMOTE MODE
(REMOTE)" will appear.
10