Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 13

[IP,,I i iT_P,l ;[_o] |i | Ii[! I
When the LCD monitor is fully open, the
Viewfinder automaticalty turns OFF.
Set POWER to CAMERA.
Adjust the Vision Adjustment
Control to your eyesight.
Press REC/PAUSE to start recording.
Press REC/PAUSE again to pause
recording.
When the LCD monitor is fully open, the
Viewfinder automatically turns OFF.
180 °
LCb Monitor
Use OPEN tab on underside of
the LCD monitor to unlock.
Swing it fully open and adjust
the angte,
_.Before you begin-
Charge the Battery. (p. 14)
180°
Set POWER to VCR.
Use OPEN tab on underside of the
LCD monitor to unlock. Swing it fully
open and adjust the angle.
Press _1 (REW)--\
to rewind the tape.
Press I_ (PLAY) to start
playback.
Press • (STOP) to stop
playback.
13