Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 66

66
DATE/TIME (p. 69)
The date and time can be set and
displayed on the screen.
C. DISPLAY (p. 70)
o select the desired type of counter
indication displayed on the LCD
Monitor or inthe viewfinder.
C. RESET (p. 70)
Setting to ON resets the counter to
zero.
DISPLAY (p. 70)
To select the desired type of display
changes to al{ function display, Partial
display, and Minimum display.
LCD/EVF SETUP (p. 19)
Setting to ON displays the menu for
adjusting the LCD brightness, color
level, and the EVF brightness.
REMOTE (p. 10)
VCRI: To receive signals from the
Remote Control, set to VCR1.
VCR2: To receive signals from
the Remote Control, set to
VCR2.
OFF: To prevent reception of
signals from the Remote
Control
BEEP SOUND
Set to ON to hear beep when starting
and stopping camera recording or
when unusual conditions occur. To
cancel the beep, set to OFF.
Palmcorder will beef
Once when you start recording
Twice when you stop recording
Repeatedly when warning of
unusual conditions. (p. 58)
_SHTR EFFECT (p. 20)
When set to ON, still pictures taken in
the PhoteShot mode are recorded
with a visual shutter effect and click
sound.
CLOCK SET (p. 14)
When set to ON, the date and time
can be set on the screen.
SELF REC (p. 22)
NORMAL: During self-recording, the
picture on the LCD Monitor is the
same as it w}l{ be recorded.
MIRROR: During self-recording, the
picture on the LCD Monitor is
horizontally reversed.
DEMO MODE (p. 11)
When set to ON, Self Demo starts.