Panasonic Digital Palmcoder PV-DV103 Operating Instructions Manual page 30

You can also use the LCD monitor te
playback your recording.
180 ° ,
|0°
2OPEN
SEARCH
Before you begin-
,
Connect the Palmcorder to a power
source. (pp. 14, 15)
• Insert a recorded cassette.
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
VCR position.
Use OPEN tab on underside of the
LeD monitor to unlock and swing open.
Press _ (REWIND/SEARCH) to
rewind the tape.
Press I_ (PLAY) to start playback,
SPrees • (STOP) to stop playback.
• When the tape reaches its beginning
during rewind or rewind search, it will
stop automatically.
m
• When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
• Using the LeD monitor reduces battery
operating time.
• You can p_acethe Palmcorder On a table,
etc. for viewing. Rotate the LCD Monitor
180 ° and swing it up against the
PaJmeorder body as shown.
You can connect earphones (not supplied)
to the PHONE Jack.
PHONE Jack
3O