Table of Contents
Advertisement
Auto White Balance ("AWB _) automatically
maintains optimum color balance in most
lighting conditions. However, when using
Digital Functions, etc., you may get better
results by using the manual adjustment.
Set POWER to CAMERA.
Press AUTO/MANUAL
so that the
"MNL" indication appears in the EVF
or the LCD monitor.
Press JOG KEY repeatedly until
"AWB" appears in the EVF or LCD
monitor.
4
RoUte JOG KEY to select other
modes. (See mode chart at left.)
• Press AUTO/MANUAL
to cancel the
setting.
AWB
-.0_
m
2AUTO/MAN UAL
Automatically
maintains optimum
color balance in most lighting
conditions.
When the source illumination is a
halogen/amp.
When shooting outdoors on a
sunny d_y.
The White Balance setting t hat
was previously set manually.
• When ZOOM is set to t0X or
h)gher, White Balance cannot be
adjusted.
* For manual White Balance
adiustment:
A.
Rotate JOG KEY to select "_%_.
B. Point the Palmoorder at a white
object (full-screen)
end hold JOG
KEY down until "_"
indication
stops
flashing.
• if "_B.Z' i ndication flashes when the
Palmcorder is turned on, the previous
manual White Balance setting is in
effect.
In the following
cases, the "L'.Z'
indication
flashes:
• The flashing indicates that the
previous(y adjusted White Balance
setting is still kept. This setting will be
kept until White Balance is adjusted
again.
• Correct White Balance may not be
attainable manually in poor lighting.
, DISPLAY must be set to ALL {or MF, AE,
W.BALANCE,
HIGH SPEED SHUTTER,
or IRIS to be displayed on the LCD or
EVF.
• While "GAIN UP" or "MAGICPIX _is
displayed on the LCD or EVF, Manual
White Balance is inoperable.
26
Advertisement
Table of Contents
