Setup Menu - Dell PowerEdge R810 Owner's Manual

LCD backlight will turn off after five minutes of inactivity if there are no error
messages. Press one of the three navigation buttons (Select, Left, or Right) to
view the Home screen.
To navigate to the Home screen from another menu, continue to select the
up arrow until the Home icon
icon.
From the Home screen, press the Select button to enter the main menu. See
the following tables for information on the Setup and View submenus.

Setup Menu

NOTE:
When you select an option in the Setup menu, you must confirm the option
before proceeding to the next action.
Option
DRAC
Set error
Set home
16
About Your System
is displayed, and then select the Home
Description
Select DHCP or Static IP to configure the network
mode. If Static IP is selected, the available fields are IP ,
Subnet (Sub), and Gateway (Gtw). Select Setup DNS
to enable DNS and to view domain addresses. Two
separate DNS entries are available.
Select SEL to display LCD error messages in a format
that matches the IPMI description in the SEL. This can
be useful when trying to match an LCD message with
an SEL entry.
Select Simple to display LCD error messages in a
simplified user-friendly description. See "LCD Status
Messages" on page 22 for a list of messages in this
format.
Select the default information to be displayed on the
LCD Home screen. See "View Menu" on page 17 to see
the options and option items that can be selected to
display by default on the Home screen.