Pci Irq Assignments Screen; Serial Communication Screen - Dell PowerEdge R810 Owner's Manual

Option
OS Watchdog Timer
(Disabled default)
I/OAT DMA Engine
(Disabled default)
Embedded Video
Controller
(Enabled default)
SR-IOV-Global Enable
(Disabled default)

PCI IRQ Assignments Screen

Option
<PCIe device>

Serial Communication Screen

Option
Serial Communication
(On without Console
Redirection default)
Serial Port Address
(Serial Device 1=COM1,
Serial Device2=COM2
default)
Description
Aids recovery of the operating system, if your system
stops responding. If set to Enabled, the operating system
is allowed to initialize the timer.
Enables/disables the I/O Acceleration technology option.
Enables/disables BIOS support for the Embedded Video
Controller.
Enables/disables BIOS configuration of Single Root I/O
Virtualization (SR-IOV) devices.
Description
Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.
Description
Selects whether the serial communication devices
(Serial Device 1 and Serial Device 2) are enabled in
BIOS. BIOS console redirection can also be enabled and
the port address used can be specified.
Options are On without Console Redirection, On with
Console Redirection via COM1, On with Console
Redirection via COM2, and Off.
Sets the serial port addresses for the two serial devices.
NOTE:
Only Serial Device 2 can be used for Serial Over
LAN (SOL). To use console redirection by SOL, configure
the same port address for console redirection and the
serial device.
Using the System Setup Program and UEFI Boot Manager
67