Dell PowerEdge R810 Owner's Manual page 157

CAUTION:
Do not lift the system board assembly by grasping a memory module,
processor, or other components.
20 Hold the processor board by the handle and a heat-sink release lever (see
Figure 3-23). Angle the processor board out toward the back of the system
and lift the board out of the chassis.
21 Pull the release pin and slide the I/O board forward and out of the chassis.
Figure 3-31. Removing and Installing the System Board
1
10
1 heat-sink release lever
3 release pin
5 tab
7 guide pins (2)
9 processor board
2
9
8 8
2 power distribution board
4 I/O board
6 high-speed connector
8 release levers (2)
10 handle
Installing System Components
3
4
5
6
7
157