Dell PowerEdge R810 Owner's Manual page 137

Figure 3-24. Removing and Installing a Processor
6
1 processor
3 socket keys (2)
5 ZIF socket
7 pin 1 indicators (2)
CAUTION:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
11 Carefully, lift the processor out of the socket and leave the release lever up
so that the socket is ready for the new processor.
7
2
4
6
Installing System Components
4
5
notches in processor (2)
processor shield
socket-release lever
1
2
3
137