Dell PowerEdge R810 Owner's Manual page 124

Figure 3-19. Installing or Removing an iDRAC6 Enterprise Card (Optional)
6
1 iDRAC6 enterprise card
3 VFlash SD card
5 retention standoff tabs (2)
5 If applicable, connect the Ethernet cable from the iDRAC6 Enterprise
Card connector on the system back panel. See Figure 1-3.
6 Close the system. See "Closing the System" on page 85.
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
8 Enter the iDRAC6 configuration utility and set up the Ethernet mode. See
"iDRAC6 Configuration Utility" on page 79.
124
Installing System Components
1
5
2
4
6
2 3
4
VFlash media slot
retention standoff posts (2)
iDRAC6 enterprise card connector