Removing The Integrated Storage Controller Card - Dell PowerEdge R810 Owner's Manual

Hardware owner's manual
Hide thumbs Also See for PowerEdge R810:
Table of Contents

Advertisement

Removing the Integrated Storage Controller Card

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 84.
3 Disconnect the cables connected to the card.
4 Pull the card out from the connector on riser 1 and angle the card out of
the plastic card guides.
5 Close the system. See "Closing the System" on page 85.
126
Installing System Components
Many repairs may only be done by a certified service technician. You

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents