Using The Touch Panel; How To Use The Touch Panel; Selection Of Function - Sharp AR-C330 Operation Manual

USING THE TOUCH PANEL

How to use the touch panel

READY TO COPY.
PAPER TYPE
60~105 g /m
1. A4
2
106~130 g /m
2. A3
2
3. B4
TRANSPARENCY
SPEED MODE
AUTO
EXPOSURE PAPER SELECT
RECALL STORE/DELETE

Selection of function

CANCEL
ERASE
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT ERASE
CENTRING TRANSPARENCY INSERTS
COLOUR
COVERS
ADJUSTMENTS
AUTO AUTO A4
EXPOSURE PAPER SELECT
1-8
You can set or cancel a function displayed on the touch
panel by pressing (touching) a key with a finger. The touch
key operation can be confirmed with a beep tone (and
highlighting of the touch key).
131~280 g /m
2
5 5 5 5 5 KEY OPERATOR For the beep tone to be heard, the beep tone must be
TRANSPARENCY
QUALITY MODE
enabled by a key operator program. See page 8-18.
100%
COPY RATIO
A grayed out function key represents unavailability of that
function. If a grayed out key is pressed, two short beeps will
sound.
To register the selected settings for a function, press the
OK
"OK" key on the setting screen. The settings indicated by
OK
a highlighted display will be registered as a selected function.
(0~20)
10
mm
Some special functions can be selected by pressing the
relevant keys on the SPECIAL MODES screen to highlight
OK
the keys. To cancel these functions, press the relevant keys
DUAL PAGE
again to return the keys to the normal display. These
COPY
functions are:
Dual page copying, Centring, Transparency inserts, Neg./
IMAGE EDIT
pos. reverse, Mirror image, and A3 (11x17) full-bleed.
100%
COPY RATIO