Sharp AR-C330 Operation Manual page 152

KEY OPERATOR PROGRAMS
PRINTER KEY OPERATOR PROGRAMS (optional)
Program Name
Enable Bypass-Tray Size
Detection
Enable Bypass-Tray Type
Detection
Prohibit Bypass-Tray Selection
Prohibit Auto Tray Switching
Disabling of Stapler
ACCOUNT CONTROL
Program Name
Auditing Mode
Number of Sheet per
Account
Billing by Account
Resetting Account
Account Number Control
Price Setting
Account Limit Setting
Account Number Security
OTHER PROGRAMS (Total Count, Program List Printout)
Program Name
Total Count
Program List
Printout
8-6
Function
Enables or disables paper size detection for the bypass tray.
Enables or disables paper type detection for the bypass tray.
Enables/disables bypass tray selection in the 'Auto Tray
Switching' mode.
Enables/disables automatic switching between paper trays
during printing when paper runs out.
Prevents damage to the stapler while awaiting repair service.
(The stapler is included in the optional finisher (AR-FN4).)
Function
Enables or disables the basic auditing mode, which controls
access to copier, printer, and scanner.
Displays the total number of copies, printed sheets, and
scanned sheets against account numbers..
Displays the accumulated cost of copies against
account numbers.
Resets all audit accounts or selectively resets individual
accounts.
Registers accounts, deletes accounts, changes an account
number, or prints all registered account numbers.
Sets up to 4 levels of price per print against account numbers.
Sets the maximum number of copies, printed sheets, and
scanned sheets against a registered account number.
Guards against trial and error entering of audit account
numbers.
Function
Recalls the total counts, including counts of the copier, printer,
scanner, document feeder, duplex module, and stapler.
Sequentially prints available key operator programs.
Page No.
8-24
8-24
8-25
8-25
8-25
Page No.
8-26
8-27
8-28
8-29
8-30
8-31
8-33
8-34
Page No.
8-35
8-35