Table of Contents
Advertisement
COVERS
Covers
2-SIDED
COPY
OUTPUT
SPECIAL
MODES
2-SIDED
COPY
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
ERASE
CENTRING
TRANSPARENCY INSERTS
COLOUR
COVERS
ADJUSTMENTS
AUTO
AUTO
A4
EXPOSURE
PAPER SELECT
3-14
The COVERS mode is used to place covers on the front, back, or both
the front and back of multipage documents.
q
To use the COVERS mode, an optional RADF must be installed.
q
Front cover sheets can be copied on, but only on the front side even
in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
The back side of the original designated as the cover will not be
copied.
q
Back cover sheets cannot be copied on, either on the front side or on
the back side.
q
Cover sheets must be fed from the bypass tray and must be the same
size as the copy paper being used to copy the document.
q
When the COVERS mode is selected, the stream feeding mode of
the RADF will always be off.
Place the originals in the optional document feeder tray.
1
Press the 2-SIDED COPY key and select the desired
2
duplex mode if needed. Press the "OK" key to close the
duplex selection window.
AUTO
Press the SPECIAL MODES key.
3
q
The SPECIAL MODES screen will appear.
READY TO
Press the "COVERS" key on the touch panel.
4
q
The setting screen for COVERS will appear.
OK
DUAL PAGE
COPY
IMAGE EDIT
100%
COPY RATIO
LOAD COVER STOCK INTO BYPASS-TRAY.
COVERS
CANCEL
PRINT ON FRONT COVER?
FRONT
YES
BACK
NO
FRONT+BACK
OK
OK
Advertisement
Table of Contents
Troubleshooting
