Table of Contents
Advertisement
Auto Colour Calibration
The Auto Colour Calibration program enables automatic colour
gradation correction when it becomes misadjusted.
NOTE:
The colour gradation may not be sufficiently corrected after one
correction cycle. If so, a re-execution of the program may be necessary.
This program can be selected by pressing the "AUTO COLOUR
CALIBRATION" key on the category menu screen.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
SETTINGS
ENABLE/DISABLE
SETTINGS
AUTO COLOUR CALIBRATION
1.
Select the "AUTO COLOUR CALIBRATION" key on the
category menu screen.
q
The following display will appear.
KEY OPERATOR PROGRAMS
AUTO COLOUR CALIBRATION
USE A3 PAPER FOR THIS ADJUSTMENT.
PRESS [EXECUTE] TO PRINT THE TEST PATCH.
2.
Press the "EXECUTE" key.
q
The copier will print the test patch.
3.
After the test patch is printed, place it on the document
glass of the copier with 5 white sheets of the same size
on top of it and press the "EXECUTE" key again.
q
Place the test patch on the document glass as shown in the
illustration.
q
The copier will start scanning the test patch on the document
glass and the adjustment will automatically be made.
Place the test patch as shown.
4.
Press the "OK" key to exit the program.
q
To re-execute the calibration, repeat all the steps.
OK
TIMER SETTING
REGISTRATION
ADJUSTMENT
OK
EXECUTE
BLACK
8-23
Advertisement
Table of Contents
Troubleshooting
