Using The Touch Panel; How To Use The Touch Panel; Selection Of Function - Sharp AR-505 Operation Manual

USING THE TOUCH PANEL

How to use the touch panel

READY TO COPY.
1. A4
2. A3
AUTO AUTO 8/ 11 1
2
EXPOSURE PAPER SELECT
RECALL
STORE/DELETE

Selection of function

CANCEL
ERASE
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT ERASE
MULTI SHOT COVERS
PAMPHLET COPY IMAGE EDIT
AUTO AUTO A4
EXPOSURE PAPER SELECT
1-8
You can set or cancel a function displayed on the touch
panel by pressing (touching) a key with a finger. The touch
key operation can be confirmed with a beep tone (and
highlighted display).
KEY OPERATOR For the beep tone to be heard, the beep tone must be
enabled by a key operator program. See page 8-30.
100%
COPY RATIO
If any keys are displayed gray, the keys have been disabled.
If you press these keys, two short beeps will be sounded.
To register the selected settings for a function, press the
OK
"OK" key on the setting screen. The settings indicated by
OK
a highlighted display will be registered as a selected function.
(0~20)
10
mm
Some special functions can be selected by pressing the
relevant keys on the SPECIAL MODES screen (page 3-4) or
OK
on the IMAGE EDIT menu (page 3-21) to highlight the keys.
DUAL PAGE
To cancel these functions, press the relevant keys again to
COPY
return the keys to the normal display. These functions are:
TRANSPARENCY
INSERTS
Dual page copying, Centring, B/W reverse, and Binding
TEXT STAMP
change.
100%
COPY RATIO