Table of Contents
Advertisement
PART NAMES AND FUNCTIONS
Operation Panel
The key and indicators
are not used for the
copier features.
LCD touch panel
Displays information to assist the operator.
Various operation keys are included in the touch
panel depending on the particular screen being
displayed.
10-key pad
Used to set the copy quantity.
CLEAR (
) key
Press to clear the copy quantity display, or press
during a copy run to terminate copying. The
copier will stop after copies in progress are
finished.
INTERRUPT (
) key and indicator (p. 2-20)
Interrupts a copy run.
COPY key
Press to return to the COPY mode when the
PRINT mode is active. If pressed in the COPY
mode, the total output count will be displayed
during the key press.
Press to exit the sleep mode.
AUDIT (
) key
ACC.#
Press to enter the account number if the auditing
mode has been set for only the colour copy mode.
Also closes an open account.
PROGRAM (
) key (p. 2-18)
Press to select the job memory mode.
6-4
SPECIAL
MODES
2-SIDED
COPY
OUTPUT
INFORMATION
CUSTOM
SETTINGS
CLEAR ALL (
) key
CA
Clears all selected settings and returns the copier
to the initial settings.
BLACK COPY START (
Black/white copying is possible when the
indicator is on.
Press to start black/white copying.
COLOUR COPY START (
indicator
Colour copying is possible when the indicator is
on.
Press to start colour copying.
SPECIAL MODES key (p.3-1)
Press to select special functions.
Message display
Messages are displayed regarding copier status
and operation.
Paper size display
The sizes of loaded copy paper are displayed and
the selected paper feed location is highlighted.
indicates the amount of copy paper.
Copy quantity display
Displays the specified number of copies.
Original size display
The original paper size is displayed.
) key and indicator
) key and
Advertisement
Table of Contents
Troubleshooting
