Sharp AR-C330 Operation Manual page 154

KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
TIMER SETTINGS
SETTINGS
ENABLE/DISABLE
REGISTRATION
SETTINGS
ADJUSTMENT
AUTO COLOUR CALIBRATION
KEY OPERATOR PROGRAMS
TIMER SETTINGS
SLEEP MODE SETTING
AUTO CLEAR SETTING
PREHEAT MODE SETTINGS
MESSAGE TIME SETTING
8-8
Select the desired category on the touch panel.
5
Example:
OK
q
If you have selected "PRINTER" or "ACCOUNT CONTROL" in
step 4, this step is not needed.
Press the key of the desired program on the touch panel.
6
Example:
OK
60min q
For some programs, a check box is displayed to the left of the
program name. If the box is pressed, a check mark will appear and
60sec
the program will be set. If the box is pressed again, the check mark
15min will disappear and the program will be cancelled.
q
For other programs, the program setting screen of the program
6sec
will appear when the program key is pressed.
q If and/or
displayed using these keys.
Follow instructions for the program.
7
q If a mistake is made during entry, press the CLEAR (
clear the entry.
q
To continue with other key operator programs, press the "OK" key
and then select another program.
To exit the key operator program mode, press the CLEAR
8
ALL (
CA
To select the timer settings category, press the "TIMER
SETTINGS" key.
To see the auto clear setting, press the "AUTO CLEAR
SETTING" key.
keys are displayed, additional programs can be
) key.
) key to