Using The Staple Sorter - Sharp AR-C330 Operation Manual

20-BIN STAPLE SORTER (AR-SS2)

Using the staple sorter

SORT
READY TO COPY.
OUTPUT
STAPLE
NON SORT SORT
AUTO AUTO A4
EXPOSURE PAPER SELECT
READY TO COPY.
OUTPUT
STAPLE
NON SORT SORT
AUTO AUTO A4
EXPOSURE PAPER SELECT
READY TO COPY.
OUTPUT
STAPLE
NON SORT SORT
AUTO AUTO A4
EXPOSURE PAPER SELECT
READY TO COPY.
OUTPUT
STAPLE
NON SORT SORT
AUTO AUTO A4
EXPOSURE PAPER SELECT
7-4
Press the OUTPUT key and select the desired mode.
GROUP
To cancel the mode, press the OUTPUT key and select "NON
SORT" on the touch panel.
NON-SORT
OK
When none of the three sorter modes, SORT, STAPLE SORT or
GROUP is selected, the copier is in the NON-SORT mode. In this
GROUP
SORT
mode, all copies will be deposited in the top bin of the sorter.
Be sure to use the NON-SORT mode when copying onto special
papers such as transparency film or label stock.
100%
COPY RATIO
SORT
OK
Press the OUTPUT key and select the SORT mode.
SORT is used for automatic copy collating. Copies of each original
GROUP
SORT
will be sequentially deposited in the sort bins.
100%
COPY RATIO
STAPLE SORT
OK
Press the OUTPUT key and select the STAPLE SORT mode.
In this mode, copies will be automatically sorted and finished sets of
GROUP
SORT
copies can be stapled with the manual staple key.
When used in conjunction with an optional RADF, sorted copies will
be automatically stapled.
100%
COPY RATIO
GROUP
OK
Press the OUTPUT key and select the GROUP mode.
In the GROUP mode, all copies of the same original will be
GROUP
SORT
deposited in the same bin.
100%
COPY RATIO