Table of Contents
Advertisement
INSTALLATION REQUIREMENTS
To ensure safety and proper machine performance, please note the following
before initial installation and whenever the machine is to be relocated.
1.
The copier should be installed near an accessible power outlet for easy
connection.
2.
Be sure to connect the power cord only to a power outlet that meets the
specified voltage and current requirements.
Also make certain the outlet is properly grounded.
q
For this copier's power supply requirements, see the name plate
located on the right hand side at the rear corner of the copier.
3.
Do not install the machine where it is:
q
damp or humid,
q
exposed to direct sunlight,
q
extremely dusty,
q
poorly ventilated,
q
subject to extreme temperature or humidity changes (e.g., near an air
conditioner or heater).
4.
Ensure that the area chosen for the machine location is level.
5.
Be sure to allow the required space around the machine for servicing and
proper ventilation.
1-2
30 cm
(11-13/16")
60 cm
(23-5/8")
60 cm
(23-5/8")
30 cm
(11-13/16")
Advertisement
Table of Contents
Troubleshooting
