List Of Network Settings; General Settings; Tcp/Ip Settings - Canon imagePROGRAF W7200 Network Manual

List of Network Settings

If you are using a Web browser (Remote UI), you can change the settings of
the network interface board. The settings that can be changed are listed in the
tables below.
„ General Settings
Device Name
Location
Administrator
Phone
Comments (E-mail)
Password
„ TCP/IP Settings
Use DHCP
Use BOOTP
Use RARP
IP Address
Subnet Mask
Gateway Address
Item
Device name (Range: 0 to 32 chars.)
Device location (Range: 0 to 32 chars.)
Name of Administrator for the device (Range: 0
to 32 chars.)
Telephone number of the Administrator (Range:
0 to 32 chars.)
Administrator Comments (Range: 0 to 32 chars.)
Device password (Range: 0 to 15 chars.)
Item
The setting in the IP address that determines
whether DHCP is used.
The setting in the IP address that determines
whether BOOTP is used.
The setting in the IP address that determines
whether RARP is used.
The IP address of the printer.
The subnet mask
The gateway address.
Description
Description
List of Network Settings
Initial Value
Blank
Blank
Blank
Blank
Blank
Blank
Initial Value
Off
Off
Off
192.168.0.215
255.255.255.0
0.0.0.0
6-3