Required System Environment; System Environment Required For Printing; Using A Tcp/Ip Network For Printing; Using An Appletalk Network For Printing - Canon imagePROGRAF W7200 Network Manual
Network guide
Hide thumbs
Also See for imagePROGRAF W7200:
- User manual (187 pages) ,
- Setup manual (126 pages) ,
- Manual (126 pages)
Table of Contents
Advertisement
Required System Environment
System Environment Required for Printing
„ Using a TCP/IP Network for Printing
Important
„ Using an AppleTalk Network for Printing
Note
1-2
Before You Begin
This section describes the system environments that are supported by the
network interface of the printer.
The lists below describe the system environments required to support the
network in use.
z Compatible Operating Systems:
• Windows Me/Windows 98/Windows 95
• Windows NT 4.0
• Windows 2000
• Windows XP
z Compatible Computers:
• IBM PC or IBM compatible PC
z If you are using Windows NT 4.0, install Service Pack 6 or later.
z Compatible Computer
• A Macintosh Series computer equipped with a Power PC processor.
z Compatible Operating Systems
• Mac OS 8.6 or later
• Mac OS x 10.1 or later
z Compatible AppleTalk
• EtherTalk Phase 2
z Required Memory
• 24 MB or more for Mac OS 8.6, 32 MB or more for Mac OS 9
z This printer is not compatible with a Macintosh Local Network.
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF W7200 and is the answer not in the manual?
Questions and answers